Cooled integrated circuit amplifies with lowest noise so far

Mar. 22, 2013 ? Researchers at Chalmers University of Technology, Sweden, have demonstrated an integrated amplifier with the lowest noise performance so far. The amplifier offers new possibilities for detecting the faintest electromagnetic radiation, for example from distant galaxies.

A fundamental property for the first microwave amplifier in the radio receiver is its noise figure. This is normally given in decibel (dB). A typical noise figure for low-noise amplifiers in mobile communication systems is tenths of a decibel.

Last year, Chalmers reported a world record for a low-noise amplifier in the journal Electron Device Letters. The amplifier exhibited a minimum noise figure of 0.018 dB across a bandwidth of 4-8 GHz. However, since the low-noise amplifier was designed in a hybrid solution, scaling up to larger quantities turned out to be very difficult.

Chalmers has now in collaboration with a company called Low-Noise Factory published an article on an integrated ultra-low-noise amplifier. The scientists have developed a unique indium phosphide-based process for what is known as high electron mobility transistors (HEMT). Transistors and other semiconductor components have been fabricated on a monolithic chip on an indium phosphide wafer. All parts of the design such as semiconductor layers, components, process and circuit design have been optimised for the lowest noise performance.

As a result, an integrated 2.0 x 0.75 mm amplifier with an ultra-low-noise figure of 0.045 dB was demonstrated. The amplifier had a very large bandwidth of 0.5-13 GHz and a high gain exceeding 38 dB across the frequency band. In order to show such extreme performance, the amplifier was cooled to minus 260 degrees of Celsius.

"The combination of high gain, large bandwidth and ultra-low-noise figure makes this circuit very at-tractive for large multipixel arrays containing thousands of antennas," says Jan Grahn, research group leader at Chalmers.

"The integrated ultra-low-noise process enables the fabrication of thousands of amplifiers with identi-cal performance. One potential future application is in the world's largest radio telescope SKA (Square Kilometer Array) that is being planned, an international project where the Onsala Space Observatory at Chalmers is one of the acting members. In huge applications such as the SKA, even a small noise-figure reduction in the first low-noise amplifier in the receiver chain may potentially bring about major savings in the final system design."

Share this story on Facebook, Twitter, and Google:

Other social bookmarking and sharing tools:

---

Story Source:

The above story is reprinted from materials provided by Chalmers University of Technology.

Note: Materials may be edited for content and length. For further information, please contact the source cited above.

---

Journal References:

1. J. Schleeh, G. Alestig, J. Halonen, A. Malmros, B. Nilsson, P. A. Nilsson, J. P. Starski, N. Wadefalk, H. Zirath, J. Grahn. Ultralow-Power Cryogenic InP HEMT With Minimum Noise Temperature of 1 K at 6 GHz. IEEE Electron Device Letters, 2012; 33 (5): 664 DOI: 10.1109/led.2012.2187422
2. Joel Schleeh, Niklas Wadefalk, Per-?ke Nilsson, J. Piotr Starski, Jan Grahn. Cryogenic Broadband Ultra-Low-Noise MMIC LNAs for Radio Astronomy Applications. IEEE Transactions on Microwave Theory and Techniques, 2013; 61 (2): 871 DOI: 10.1109/TMTT.2012.2235856

Note: If no author is given, the source is cited instead.

Disclaimer: Views expressed in this article do not necessarily reflect those of ScienceDaily or its staff.

Source: http://feeds.sciencedaily.com/~r/sciencedaily/top_news/~3/yKLhU41CCIc/130322090744.htm

punksatony phil 2012 groundhog day groundhog phil pee wee herman ketamine ground hogs day 2012 goundhog day